RXU1001DSH-3AX
Sku: RXU1001DSH-3AX
Vendor: Cybertech
Status: Stocking
Contact
- With QUADROGUIDE® for high roughing capacity, dynamics and precision
- All axes with direct drives
- Milling spindle may be chosen depending on the application, up to 67 Nm (S1) available
- Compared to the RXU1000DSH the travel in X-direction and the maximum workpiece diameter are increased, the offset of the C-axis is higher
- Highly efficient due to high stiffness and optimum layout
of the mass inertia - Two-sided support of the C-axis for high stability and precision
- Counter bearing dimensioned for up to 7 t load
- High resolution optical encoders in all axes
- Powerful wear-free direct drives in all axes
- Special Röders 5-axis geometry compensation for high precision, also at long lasting machining operations
- Precise temperature control of the machine elements
- For dynamic decoupling, the swivelling direction is at right angles to the X axis
- Windows very close to the machining area, visible from two sides
- Chucks for different pallet systems can be integrated
into the C-table
| Machining range | 800 mm x 855 mm x 500 mm |
| Swivelling range | +/-115 degrees (others on request) |
| Rotation range | Almost unlimited |
| Table size | 400 mm round or 400 mm square, 600 mm round with two flattened sides or 600 mm round |
| Workpiece weight | Max. 800 kg |
| Feed | 0–60,000 mm/min |
| Milling spindle (standard) | 24,000 rpm, 67 Nm (S1), HSK A63, maximum tool diameter 35 mm (others on request) |
| Tool changer | 24 (rotary – can be loaded during machining) optional: 40 places or more (chain changer – can be loaded during machining) integrated measuring laser |
| Chip disposal | With 2 screws into chip box behind the machine or with additional chip conveyor |
| Machine weight | ~21.0 t |
| Required space | W 3500 mm x L 4814 mm (depending on configuration) x H 3600 mm |
Similar product
Products that you may also want to see
With QUADROGUIDE® for high roughing capacity, dynamics and precisionAll axes with direct drivesMilling spindle may be chosen depending on the application, up to 67 Nm (S1) ...
Liên hệ
With QUADROGUIDE® for high roughing capacity, dynamics and precisionAll axes with direct drivesMilling spindle may be chosen depending on the application, up to 67 Nm (S1) ...
Liên hệ
With QUADROGUIDE® for high roughing capacity, dynamics and precisionAll axes with direct drivesMilling spindle may be chosen depending on the application, up to 67 Nm (S1) ...
Liên hệ
Viewed products
Our products that you viewed
