FA50V

Sku: FA50V
Vendor: Cybertech
Status: Stocking
Contact

With machine performance up to 36 sq”/hr in hardened D2 steel, the FA50V Advance is one of the world’s fastest high-accuracy wire-cut EDM machines. The FA Advance Series features the new M700 series control with 15″ touch screen, providing easy user interface and many features that will Advance your EDM machining. It also showcases Mitsubishi’s continuous dedication to high precision.

Tiêu đề
Hotline sales support 24/7: (+84) 24 3764 8882
|
Quantity

Machine Travels: X x Y x Z in (mm)51.2 x 39.4 x 15.7 (1300 x 1000 x 400)
Maximum Workpiece Dimensions: W x D x H in (mm)78.7 x 63.0 x 15.6 (2000 x 1600 x 395)
Max. Submerged Workpiece Weight: lb (kg)8818 (4000)
Table Dimensions: in (mm)65.3 x 54.1 (1650 x 1380)
U/V Travels (from center): in (mm)±3.0 x ±3.0 (±75 x ±75)
Taper Angle @ Thickness: in (mm)15 deg.@ 10.5 (15 deg.@ 265)
Wide Angle Taper (Optional Guides Required)45 deg. @ 2.4″ (No AT Possible)
Table Rapid Feed Speed: in/min (mm/min)51.2 (1300)
Power SupplyV500
Minimum Drive Unit / Resolution0.00001 / 2 millionths (0.0001 / 0.05µm)
User Program Storage [Hard Disk Size]1 GB [80 GB]
Wire Diameter Possible: in (mm)0.008~0.014 (0.2~0.36)
Minimum Start Hole Diameter: in (mm)0.02 (0.5)
Max. Wire Spool size STD [optional]: lb (kg)22 [44] (10 [20])
Filters / Type4 / Paper
Filter Tank Capacity: gal (L)845 (3200)
Machine System Dimensions: in (mm)211.5 x 198.5 (5375 x 5045)
Machine Installed Height: in (mm)111.1 (2823)
Machine System Weight: lb (kg)22,570 (10,240)
Fluid System Weight: lb (kg)1000 (2205)
Power Requirements [KVA]200-230V [15.0] Built in AVR
Compressed Air Requirements2.7 cu.ft./min. @ 71~100 psi

 

Viewed products

Our products that you viewed
-%
Facebook Youtube
backtotop